??
EMAX-HI絕對值磁柵尺用于動態過程的磁性高分辨率線性編碼器
高分辨率-可達1微米
操作速度可達10米/秒
測量長度可達8米
支持協議接口：SSI、CANopen（DS406）、CAN BASIC ELGO（CNO）、可選址RS422
實時的額外增量式方波信號（A、B）或正弦/余弦模擬信號輸出（1 Vss），用于實現高動態控制（可選）
在安裝和操作時，通過視覺（LED）和信號輸出錯誤信息確保高安全性，以防止超出刻度上的允許最大讀數范圍
典型應用：線性執行器、抓取和放置、醫藥技術
MECHANICAL DATA
| Measuring principle | absolute |
| Repaet accuracy | ± 1 increment |
| System accuracy μm at 20 °C | ± (10 + 20 x L), L = measuring length in meters |
| Distance sensor / tape | 0.1 ... max. 0.5 mm, without cover tape |
| Sensor housing material | aluminium |
| Housing dimensions (L x W x H) | 70 x 16 x 30 mm |
| Required magnetic tape | AB20-10-10-2-R-11 |
| Pole pitch | 1 mm |
| Max. measuring length | 8 m |
| Type of connection | 12-pin M12 round connector (external) |
| Sensor cable | 5 m standard length as accessory, drag chain suitable, other cable lengths on request |
| Required sensor cable | 5 m: DKA-00-RCF0-050-XXXX-12-T-D-S |
| Sensor cable bending radius | min. 60 mm |
| Weight | approx. 50 g without cable, cable (accessory): approx. 60 g/m |
ELECTRICAL DATA
| Power supply voltage | 10 ... 30 VDC |
| Residual ripple | < 10 % |
| Current consumption | max. 150 mA |
| Interfaces | SSI-Interface, CANopen (DS406), CAN BASIC ELGO (CNO), RS422 or addressable RS422 |
| Resolution | 0.001 mm |
| Max. operating speed | 1 m/s with continuous absolute scanning, 10 m/s with sin/cos scanning, 2 m/s with TTL scanning |
| Further options | additional incremental A/B square wave signals or 1 Vss sin/cos |
ENVIRONMENTAL CONDITIONS
| Storage temperature | -20 ... +85 °C |
| Operating temperature | -10 ... +70 °C, -25 ... +85 °C on request |
| Humidity | 95 %, non-condensing |
| Protection class | IP40 (standard), IP65 (option V) |
